Shure ULXD4D

RF Carrier Range: 470–932 MHz, varies by region
Image Rejection :>70 dB, typical
Latency: <2.9 ms
RF Sensitivity: -98 dBm at 10-5 BER
Working Range: 100 m (328 ft) line-of-sight
RF signal absorption:, reflection and interference.
Audio Frequency Range 20 Hz to 20 kHz Note: Dependent on microphone type
Audio Dynamic Range Analog Output: >120 dB, A-weighted
(System Gain @ +10) Dante™ Digital Output: 130 dB (typical), A-weighted
Total Harmonic Distortion <0.1%
(−12 dBFS input, System Gain @ +10)
Operating Temperature Range -18°C to 50°C
Dimensions

• ULXD4D, ULXD4Q: 482 x 274 x 44 mm (W x D x H)

Weight:

• ULXD4D: 3.36 Kg (7.4 lbs), without antennas

Power Requirements

• ULXD4D: 100 to 240 V AC, 50-60 Hz, 0.26 A max.

Gain Adjustment Range -18 to +42 dB in 1 dB steps (plus Mute setting)
Full Scale Output

• ¼" (6.35 mm): +12 dBV (ULXD4 only)
• XLR: LINE setting= +18 dBV, MIC setting= -12 dBV (all models)

Network Interface

• ULXD4D, ULXD4Q: Dual Port Ethernet 1 Gbps

Network Addressing Capability DHCP or Manual IP address, with or without gateway
Housing

• Steel; Extruded Aluminum

Battery Runtime @ 10 mW Shure SB900 Rechargeable Li-Ion: >11 hours - 2 x AA Alkaline: <11 hours
Power 1 mW, 10 mW, 20 mW
Housing

• ULXD2: Machined Aluminum

Antenna Type

• ULXD2: Integrated single band helical