Martin Jem 24/7

HEAT EXCHANGER

• 900W
• Wide bore steel vaporizing coil
• Non resettable over-temperature protection
• Electronic Temperature control using thermocouple

FLUID SYSTEM

• Electronic low fluid detection
• 2.5L fluid container
• Maximum fluid consumption 410mL/hour (Haze fluid, HOT = Lo)

REMOTE CONTROL OPTIONS

• DMX512 decoder:
  • Required Channels = 2
  • Output is proportional for all levels above 8%
  • Channels supported = 1 to 509
  • Valid start codes = 0 (dimmer data only)
  • Full framing error detection implemented
• Digital control via Digital Multifunction Controller.
• Digital Machine to Machine link

CONTROL PANEL

• LED display with 4 button keypad
• Output level control from 0 to 20
• Fan speed control from 0 to 20
• Timer range:
  • Delay time (toF) 0 seconds - 90 seconds
  • Run time (ton) 0 seconds - 90 seconds

OUTPUT DIRECTION CONTROL

• Airflow inclination can be set in the range 0 to 60 degrees.

POWER REQUIREMENTS

• Input voltage 200 - 250Vac
• Input power (max) 975W © 230V
• Main fuse 6.3AT
• Frequency 50/60Hz