Lab Gruppen FP 9000

Product afbeelding: Lab Gruppen FP 9000
Bekijk de aanbieders
Beschrijving
  • Cooling : Two fans front-to-rear airflow temperature controlled speed
  • Depth : 396 mm
  • Height : 88 mm
  • Impedance : 20000 ohm
  • Width : 483 mm
  • AC Voltage : 265 Volts
  • Common Mode Rejection (CMR) : >54 dB 20 Hz to 20 kHz
  • Power Handling : 9000 Watt
  • Product Weight : 12 kg
  • Color : Black
  • Minimum Frequency Response (Bandwidth) : 20 Hz
  • Maximum Frequency Response (Bandwidth) : 20 kHz
  • Signal to Noise Ratio : 112 dB
  • Number of Channels : 2
  • Total Harmonic Distortion + Noise (THD+N) : 0.10 %
  • Number of Watts Per Channel : 4500 Watt
  • Rack Units (Height) : 2
  • Current Draw : 5 Amps
  • THD at 1 kHz and 1 dB below clipping : <0.05%
  • Channel separation (Crosstalk) at 1 kHz : >70 dB
  • Frequency response (1 W into 8 ohms) : +0/-3 dB 2 Hz - 34.2 kHz
  • Output impedance @ 100 Hz : 19 mOhm
  • Voltage Peak Limiter (VPL) max. peak output :
  • VPL selectable per ch. : 195 170 140 116 100 80 66 54 V
  • VPL selectable when bridged 1) : 390 340 280 232 200 160 132 108 V
  • Voltage Peak Limiter mode (per ch.) : Hard / Soft
  • Gain and Level :
  • Amplifier gain selectable (all channels) 1) 23 26 29 32 35 38 41 44 dB :
  • Default gain : 38 dB
  • Level adjustment (per ch.) : Front-panel potentiometer 31 position detented from -inf to 0 dB
  • Connectors and Switches :
  • Input connectors (per ch.) : 3-pin XLR electronically balanced
  • Output connectors (per ch.) : Binding Posts 2-pole
  • Output bridge mode per two ch.â??s : A+B - Ch. A is signal input source
  • Intelligent fans (on/off) : Yes depending on presence of output signal
  • Power on/off and Remote enable on/off : Individual switches on front-panel
  • NomadLink network On board : 2 x RJ45 etherCON® connectors IN and OUT
Breid je netwerk uit
Blijf marktconform

Voor dit product zijn nog geen aanbiedingen aanwezig.