Extron USP 405

Product afbeelding: Extron USP 405
1 aanbieders
Beschrijving
USP 405
 
Video
   Gain  Unity
   Crosstalk  -50 dB @ 5 MHz
 
Video input
   Number/signal type  1 RGBHV/RGBS/RGsB computer video with 1 local monitor loop-through
1 RGBHV/RGBS/RGsB computer video, RGBcvS, component video (Y, R-Y, B-Y), S-video, or composite video
1 S-video
1 composite video
1 SDI (optional)
   Connectors  (2) 15-pin HD female: RGB computer video input and loop-through
1 x 5 BNC female: RGB computer video, component video, S-video, or composite video input
2 BNC female: composite video input and loop-through
(2) 4-pin mini DIN female: S-video input and loop-through
1 BNC female: optional SDI digital component video input
   Nominal level  1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  Analog: 0.3 V to 2 Vp-p with no offset
   Impedance  75 ohms
   Horizontal frequency   
      Input 1  24 kHz to 100 kHz
      Input 2 RGB, RGBS, HD component video   24 kHz to 100 kHz
      Input 2 RGBcvS, component video, S-video, composite video   15 kHz
      Inuts 3 and 4  15 kHz
      Input 5  CCIR 601/ITU-RBT.601 (270 Mbps)
   Vertical frequency  30 Hz to 120 Hz
   Resolution range  Autoscan 640 x 480 to 1600 x 1200*
Input resolutions above 1400x1050 are undersampled.
   Return loss  <-30 dB @ 5 MHz
   DC offset (max. allowable)  0.5 V
   External sync (genlock)  0.3 V to 1.0 Vp-p
 
Video processing
   Decoder  9 bit digital
   Encoder  10-bit digital
   Digital sampling  24 bit, 8 bits per color; 140 MHz
   Colors  16.78 million
   Horizontal filtering  8 levels
   Vertical filtering  8 levels
 
Video output
   Number/signal type  6 RGBHV, RGBS, component video (Y, R-Y, B-Y), optional SDI digital component video (CCIR 601/ITU-RBT.601), S-video, composite video
   Connectors  1 x 5 BNC female (RGB, HD component video)
(1) 15-pin HD female (RGB, HD component video)
3 BNC female (component video)
(1) 4-pin mini DIN (S-video)
1 BNC female (composite video)
1 BNC female (optional SDI digital component video)
   Nominal level  1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  0 V to 2.0 Vp-p
   Impedance  75 ohms
   Scaled resolutions  640x4801,3,4,6, 800x6001,3,4,6, 832x6243,4,6, 848x4803,6, 852x4803,6, 1024x7681,3,4,5,6, 1280x7682,6, 1280x10241,3,6, 1360x7653,6, 1365x10243,6, 1400x10501,3,6, 576p1,6, 720p3,6, 1080p3,6, 1080i1,3,6, NTSC, PAL
1 = at 50 Hz, 2 = at 56 Hz, 3 = at 60 Hz, 4 = at 75 Hz, = at 85 Hz, 
= locked to the current input's vertical refresh rate (up to 60 Hz) (Accu-RATE Frame Lock)
    NOTE     For the output resolutions listed below, the total pixel and active pixel values are reduced:
  1365x1024: 1280 active pixels
  1080i: 1280 active pixels
  1080p: 1280 active pixels
The sync timings and line widths are correct and most displays recognize the rate correctly.
   Return loss  -30 dB @ 5 MHz
   DC offset  These data are for output with input at 0 offset:
±25 mV maximum for RGB
350 ±25 mV maximum for Y of component video/S-video, composite video
650 ±25 mV maximum for R-Y & B-Y of component video, C of S-video
   Switching type  Triple-Action
 
Sync
   Input type  Autodetect (RGBHV, RGBS, RGsB), and component
   Output type  RGBHV, RGBS, and component video (tri-level or bi-level)
   Standards  NTSC 3.58, NTSC 4.43, PAL, and SECAM
   Input level  2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB
   Output level  TTL: 5.0 Vp-p, unterminated, bi-level or tri-level
   Input impedance  510 ohms
   Output impedance  75 ohms
   Max. input voltage  5 Vp-p
   Polarity  Positive or negative (selectable)
 
Control/remote — switcher/scaler
   Serial control port  RS-232, 9-pin female D connector
   Baud rate and protocol  9600 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configurations  2 = Tx, 3 = Rx, 5 = GND
   Contact closure  9-pin female D connector
   Contact closure pin configurations  1 = input 1, 4 = input 2, 6 = input 3, 7 = input 4, 8 = input 5
   IR controller module  IR 801 (optional)
   Program control  Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS)
 
General
   Power  100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +3 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Convection, vents on sides
   Mounting   
      Rack mount  Yes
   Enclosure type  Metal
   Enclosure dimensions   (1U high, full rack wide)
(4.6 cm H x 44.4 cm W x 30.5 cm D)
(Depth excludes connectors and knobs.  Width excludes rack ears.)
   Product weight   
      USP 405  2.9 kg
      USP 405, SDI input  2.9 kg
      USP 405, SDI output  2.9 kg
      USP 405, SDI in & output  3.1 kg
   Shipping weight   
      USP 405 w/SDI in & output  6 kg
      All other models  5 kg
   DIM weight (International)  6 kg
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, CUL, UL
      EMI/EMC  CE, FCC Class A
Breid je netwerk uit
Blijf marktconform

Aanbod van verhuurders

RentAround handelt als tussenpersoon en biedt zelf geen producten aan.

Registreer een gratis account of om de aanbiedingen te bekijken