Extron MTP T AV

Product afbeelding: Extron MTP T AV
1 aanbieders
Beschrijving
Video
   Gain  Unity
   Differential phase error  <1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error  <1.0% at 3.58 MHz and 4.43 MHz
 
Video input
   Number/signal type   
      MTP T AV Series  1 composite video
    
        
   Connectors   
      MTP T AV Series  1 female BNC
   
        
   Nominal level  1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  0.3 V to 1.5 Vp-p with no offset
   Impedance  75 ohms
   Return loss  <-30 dB, DC @ 10 MHz
   DC offset (max. allowable)  100 mV
 
Video output
   Number/signal type   
      MTP T AV 1 set of proprietary analog signals
      
   Connectors   
      MTP T AV 1 female RJ-45
   
   Nominal level  1 V p-p for Y of S-video and for composite video
0.3 V p-p for C of S-video
   Minimum/maximum levels  0.3 V to 1.5 Vp-p
   Impedance  75 ohms
   Return loss  <-35 dB @ 5 MHz
   DC offset  ±20mV with input at 0 offset
 
Sync
   Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM
 
Audio
   Gain   
      
      All other models  Unbalanced output: 0 dB (unity); balanced output: +6 dB
   Frequency response  20 Hz to 20 kHz, ±0.25 dB
   THD + Noise  0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N   
        
      All other models w/audio  >90 dB, balanced at maximum output (unweighted)
   Crosstalk  <-80 dB @ 1 kHz, fully loaded
   Stereo channel separation  >75 dB @ 1 kHz
   CMRR  >34 dB @ 20 Hz to 20 kHz
 
Audio input
   Number/signal type   
      MTP T AV 1 stereo, balanced/unbalanced
     
   Connectors   
      MTP T AV (1) 3.5 mm captive screw connector, 5 pole
       
   Impedance  >5.6k ohms ±5% unbalanced, >10k ohms ±5% balanced
   Nominal level  -10 dBV (0.32 Vrms)
   Maximum level  >+2.4 dBu (balanced or unbalanced) at 1%THD+N
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
 
Audio output
   Number/signal type   
      MTP T Series  1 set of proprietary analog signals (all MTP T models)
       
   Connectors   
      MTP T Series  1 female RJ-45 (shielded)
       
   
 
General
   Recommended cable type  CAT5/5e/6 (shielded or unshielded)
   External power supply  100 VAC to 240 VAC, 50-Hz, external; to 12 VDC, 1.0 A, regulated
   Power input requirements  12 VDC, 0.2 A
    NOTE     If the distance between the transmitter and receiver is less than 200' (61 m) and if the internal jumper is in setting 2, you can connect a power supply to only one device in a transmitter/receiver pair. If the distance between transmitter and receiver is greater than 200' (61 m) or if the internal jumper is in setting 1 (default), connect a power supply to each device.
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Convection, no vents
   Mounting   
      Rack mount   
         MTP T AAP Series  Yes, with optional rack panel
         All other models  Yes, with optional 1U rack shelf
      Furniture or wall mount   
         MTP T AAP Series  Yes, with optional AAP mounting plates
         All other models  Yes, with optional brackets.
   Enclosure type  Metal
   Enclosure dimensions (Depths exclude connectors and cables.)
      MTP T AAP Series   
         Faceplate  (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space AAP plate)
         Transmitter  (3.4 cm H x 6.9 cm W x 3.3 cm D)
      All other models  (1U high, one-eighth rack wide)
(4.2 cm H x 5.6 cm W x 7.6 cm D)
   Product weight  0.5 kg
   Shipping weight  2 kg
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, c-UL, UL
      EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
Breid je netwerk uit
Blijf marktconform

Aanbod van verhuurders

RentAround handelt als tussenpersoon en biedt zelf geen producten aan.

Registreer een gratis account of om de aanbiedingen te bekijken