Dynacord Xa 4000

Product afbeelding: Dynacord Xa 4000
Beschrijving
Load Impedance / SUB
2 Ohms, 4 Ohms, 8 Ohms
Maximum Midband Output Power, THD = 1%, 80Hz SUB, 1kHz TOP, Single Channel
2 Ohms - 1800 W, 4 Ohms - 1100 W, 8 Ohms - 600 W
Rated Output Power, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, Single Channel
4 Ohms - 1000 W, 8 Ohms - 500 W
Load Impedance / TOP
2 Ohms, 4 Ohms, 8 Ohms
Maximum Midband Output Power, THD = 1%, 80Hz SUB, 1kHz TOP, Single Channel
2 Ohms - 1600 W, 4 Ohms - 900 W, 8 Ohms - 500 W
Rated Output Power, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, THD < 0.1%, 20 Hz-140 Hz SUB, 140 Hz-20 kHz TOP, Single Channel
4 Ohms - 800 W, 8 Ohms - 400 W
Maximum RMS Voltage Swing, THD = 1%, 80Hz SUB, 1kHz TOP
78 V
Power Bandwith, TD = 1%, ref. 1kHz, half power @ 4 Ohms
10 Hz … 50 kHz
Voltage Gain ref.1kHz
37.3 dB
Input Sensitivity, at rated output power, 1kHz
0 dBu (0.775 V rms)
THD, at rated output power, MBW = 80kHz, 1kHz
< 0.05%
Maximum Input Level
+22 dBu (9.76 V rms)
Input Impedance, active balanced
20 kOhms
Damping Factor, 1kHz
> 300
Slew Rate
30 V/µs
Signal to Noise Ratio Amplifier, A-weighted
102 dB
Output Stage Topology
Class H
Power Requirements
240, 230, 220, 120V or 100V 50 Hz ... 60 Hz (factory configured)
Power Consumption, at 1/8 max. output power @ 4 Ohms
850 W
Protection
Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-on delay
Cooling
Front-to-rear, 3-stage-fans
Ambient Temperature Limits
+5°C … +40°C
Safety Class
I
Dimensions (W x H x D), mm
483 x 88.1 x 384
Weight
8.25 kg
Breid je netwerk uit
Blijf marktconform