Dynacord XA 2600

Bekijk de aanbieders

Beschrijving

Crossover Type : 3rd Order BU, Constant-Power-Response Stereo active 2-way
Crossover Frequency : 160 Hz
Lo-Cut : 12dB/octave, 30Hz at -3dB ref. 1kHz
Load Impedance : 8, 4 ohms
Maximum Midband Output POwer: HI-Channels - 8 ohms : 380 W THD = 1%, 1kHz, 60Hz
Maximum Midband Output POwer: HI-Channels - 4 ohms : 700 W THD = 1%, 1kHz, 60Hz
Rated Output Power: HI-Channels - 8 ohms : 300 W THD < 0.1%
Rated Output Power: HI-Channels - 4 ohms : 600 W THD < 0.1%
Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: HI-Channels - 8 ohms : 400 W
Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: HI-Channels - 4 ohms : 750 W
Maximum Midband Output POwer: LO-Channels - 8 ohms : 380 W THD = 1%, 1kHz, 60Hz
Maximum Midband Output POwer: LO-Channels - 4 ohms : 700 W THD = 1%, 1kHz, 60Hz
Rated Output Power: LO-Channels - 8 ohms : 350 W THD < 0.1%
Rated Output Power: LO-Channels - 4 ohms : 700 W THD < 0.1%
Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: LO-Channels - 8 ohms : 400 W
Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: LO-Channels - 4 ohms : 750 W
Maximum RMS Voltage Swing : 58.7 V THD = 1%
Frequency Response : 25Hz ... 45kHz -3dB, ref. 1kHz, Lo-Cut
Minimum Load Impedance : 2.5 ohms
Input Sensitivity at rated output power @ 4 ohms : 0dBu (775mV)
Maximum Input Level : +21dBu (8.7V)
THD at rated output power, MBW =80kHz : < 0.05 %
Crosstalk Attenuation : > 60 dB
Slew Rate : 30 V/µS
Power Bandwith : 10Hz ... 50kHz THD = 1%, ref. 1kHz, half power @ 4 ohms
Input Impedance : 20 k ohms 20Hz ... 20kHz, balanced
Damping Factor : > 300
Signal-to-Noise Ratio, A-weighted : > 100 dB
Power Requirements : 230V, 50Hz ... 60Hz
Power Consumption : 1800 W at 1/8 maximum output power @ 4 ohms
Cooling : Front-to-rear, 4-stage-fans
Width : 483 mm
Height : 177 mm
Depth : 426 mm
Weight : 30 kg

Breid je netwerk uit

Blijf marktconform

Voor dit product zijn nog geen aanbiedingen aanwezig.