DPA d:fine 4066 Omni In-Ear Zwart

1 aanbieders
Beschrijving
Features
- Dual Ear-Worn & Dual In-Ear Monitor
- 110mm Boom
- Omnidirectional Microphone
- Low Profile Design
Specifications
- Directional Characteristic: Omnidirectional
- Principle of Operation: Pressure
- Cartridge Type: Pre-polarized condenser
- Frequency Range: 20 Hz - 20 kHz
- Frequency Range ± 2 dB: 20 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz
- Sensitivity: Nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
- Equivalent Noise Level:
- A-Weighted: Typ. 26 dB (A) re. 20 µPa (max. 28 dB (A))
- ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
- Signal to Noise Ratio: A-Weighted, re. 1 kHz at 1 Pa (94 dB SPL): Typ. 66 dB (A)
- Total Harmonic Distortion (THD): <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
- Dynamic Range: Typ. 97 dB
- Maximum SPL: Peak Before Clipping: 144 dB
- Output Impedance
- From MicroDot: 30 - 40 ohms
- From DAD6001-BC: 100 ohms
- Cable Drive Capability: Up to 984' (300 m) with DAD6001-BC XLR adapter
- Output Balance Principle: Signal balanced with DAD6001-BC XLR adapter
- Common Mode Rejection Ratio: >60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
- Current Consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter
- Connector: MicroDot with TA5F adapter for Lectrosonics transmitters
- Boom Length: Microphone: Standard: 4.3" (110 mm)
- Capsule Diameter: 0.2" (5.4 mm)
- Cable Length: 4.3' (1.3 m)
- Cable Diameter:
- Microphone Cable: 0.06" (1.6 mm)
- In-Ear Cable: 0.08" (1.95 mm)
- Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
- Electro Magnetic Compatibility: Fully compatible
- Temperature Range: -40 to 113°F (40 to 45°C)
- Relative Humidity: Up to 90%
- Weight: 0.92 oz (26 g)
Breid je netwerk uit
Blijf marktconform
Aanbod van verhuurders
RentAround handelt als tussenpersoon en biedt zelf geen producten aan.
Registreer een gratis account of om de aanbiedingen te bekijken