DPA 4098H wit

Product afbeelding: DPA 4098H wit
Beschrijving
  • Directional characteristics:    Supercardioid
  • Principle of operation:    Pressure gradient
  • Cartridge type:    Pre-polarized condenser
  • Frequency range:    20 Hz to 20 kHz
  • Frequency range, ± 2 dB, 20 cm (7.9 in) distance:    80 Hz to 15 kHz with 3 dB diffuse field boost at 8 to 15 kHz
  • Sensitivity, nominal ± 3 dB at 1 kHz:    20 mV/Pa; -34 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted:    Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A))
  • Equivalent noise level, ITU-R BS.468-4:    Typ. 35 dB (max. 38 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):    71 dB(A)
  • Total harmonic distortion (THD):    <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
  • Dynamic range:    Typ. 100 dB
  • Max. SPL, peak before clipping:    134 dB
  • Output impedance:    From Microdot: 30 to 40 ohm; from DAD6001: 100 ohm
  • Cable drive capability:    Up to 300 m (984 ft) with DAD6001 XLR adapter
  • Output balance principle:    Signal balanced with DAD6001 XLR adapter
  • Common mode rejection ratio (CMRR):    > 60 dB from 50 Hz to 15 kHz with DAD6001 XLR adapter
  • Power supply (for full performance):    For wireless systems: Min. 5 V – max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4 V
  • Current consumption:    1.5 mA. 3.5 mA with DAD6001 XLR adapter
  • Connector:    MicroDot; 3 pin XLR-M from DAD6001 XLR adapter
  • Color:    Black (4098HB) or white (4098HW)
  • Microphone weight:    5 g
  • Microphone diameter:    10 mm
  • Capsule diameter:    5.4 mm
  • Microphone length:    154 mm
  • Polarity:    Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
  • Temperature range:    -40 °C to 45 °C
  • Relative humidity:    Up to 90 %
  • Gooseneck length:    95 mm
Breid je netwerk uit
Blijf marktconform