DPA 4060

Directional characteristics:    Omnidirectional
Principle of operation:    Pressure
Cartridge type:    Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB:    Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz.
Sensitivity, nominal, ±3 dB at 1 kHz:    20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level A-weighted:    Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equiv. noise level ITU-R BS.468-4:    Typ. 35 dB (max. 38 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):    71 dB(A)
Total harmonic distortion (THD):    < 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine
Dynamic range:    Typ. 100 dB
Max. SPL, peak before clipping:    134 dB
Output impedance:    30 – 40 ohm
Cable drive capability:    Up to 300 m (984 ft)
Power supply:    For wireless For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
Connector:    MicroDot
Color:    Black, beige, brown or white
Microphone weight:    7.5 g incl. cable and MicroDot connector
Microphone diameter:    5.4 mm
Microphone length:    12.7 mm
Cable length:    1.8 m
Polarity:    Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range:    -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH):    Up t 90%