DPA 4011A
1 aanbieders
Beschrijving
- Sensitivity : -40 dB
- Maximum Frequency Response (Bandwidth) : 20 kHz
- Maximum SPL (Sound Pressure Level) : 159 dB
- Operating Temperature (Maximum) : 113 F
- Signal to Noise Ratio : 76 dB
- Color : Matte black
- Product Weight : 0.16 kg
- Connector : XLR-3M. Pin 1: shield Pin 2: signal + phase Pin 3: - phase
- Minimum Frequency Response (Bandwidth) : 40 Hz
- Operating Temperature (Minimum) : -40 Hz
- Dynamic Range : 121 dB
- S/N ratio (A-weighted) re. 1 kHz at 1 Pa (94 dB SPL) : Typ. 76 dB (A)
- Cartridge Type : Pre-polarized condenser
- Equivalent noise level ITU-R BS.468-4 : Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
- Common Mode Rejection Ratio (CMRR) : >60 dB
- Power supply (for full specifications) : 48 V Phantom power (± 4 V)
- Output voltage RMS : >5 V
- Principle of operation : Pressure gradient
- Length : 170 mm
- Capsule Diameter : 19 mm
- Output Impedance : <200 ohm
- Output balance principle : Impedance balancing with Active Drive
- Current Consumption : 2.80 mA
- Equivalent noise level A-weighted re. 20 µPa : Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
- Matching tolerance : ±1 dB
- Minimum Load Impedance : 2 kohm
- Total Harmonic Distortion (THD) : <1 % up to 139 dB SPL peak
- Switchable attenuator : 0/-20 dB
- Relative Humidity (RH) : Up to 90 %
- Microphone Diameter : 19 mm
- Cable drive capability : 100 m
- Phase deviation for kit : <10 °
- Polarity : +V at Pin 2 for positive sound pressure
Breid je netwerk uit
Blijf marktconform
Aanbod van verhuurders
RentAround handelt als tussenpersoon en biedt zelf geen producten aan.
Registreer een account of om de aanbiedingen te bekijken