Dolby Lake Contour

Dynamic Range (unweighted):

Input Impedance:

Maximum Input Level

Input Sensitivity Trim Range

Input Common Mode Rejection Ratio

Crosstalk between Inputs A and B

Contour Specifications

• A/D and D/A Conversion Resolution 24 bit
• Internal Sampling Frequency 96 kHz
• Internal Data Path 40-bit floating-point
• Minimum Propagation Delay: 2 ms, input to output
• Maximum Available Delay: 4 s total (input to output) / 2 s input; 2 s output
• 3-position Ground Switch: 1) Inputs and Outputs grounded to the device, 2) Inputs floating, 3) Inputs and Outputs floating

  Analog to Digital Audio Inputs

• Frequency Response: +0/-0.1 dB, 2 Hz to 20 kHz
• THD+Noise (unweighted): 0.0005% typical @ 1 kHz 0.0006% typical, 20 Hz to 20 kHz
• Dynamic Range (unweighted) 113 dB typical, 20 Hz to 20 kHz
• Input Impedance: 20 kΩ balanced,10 kΩ unbalanced
• Maximum Input Level: +24 dBu
• Input Sensitivity Trim Range: +12 dBu to +24 dBu, adjustable in 1-dB steps
• Input Common Mode Rejection Ratio: Better than 65 dB 20 Hz to 20 kHz / 75 dB typical @ 1 kHz / 70 dB typical @ 20 kHz
• Crosstalk between inputs A and B: Better than -100 dB, 2 Hz to 40 kHz

  Digital to Analog Audio Outputs

• Frequency Response: +0 /-0.1 dB, 3 Hz to 10 kHz / +0 /-0.5 dB, 2 Hz to 20 kHz
• THD+Noise (unweighted): 0.0005% typical @ 1 kHz 0.0007% typical, 20 Hz to 20 kHz
• Dynamic Range (unweighted): 111 dB typical, 20 Hz to 20 kHz
• Output Impedance: 50 Ω
• Maximum Output Level: +21 dBu
• Crosstalk between Outputs: Better than -100 dB, 2 Hz to 40 kHz

  Combined Analog to Digital and Digital to Analog

• THD +Noise (unweighted): 0.0007% typical @ 1 kHz 0.0009% typical, 20 Hz to 20 kHz
• Dynamic Range (unweighted): 109 dB typical, 20 Hz to 20 kHz

  Equalization

• Unlimited number of EQ Overlays
• Available Filters: low shelf, high shelf, parametric, Mesa, Third -octave ideal Graphic EQ

  Crossover Filters

• Linear Phase Filters: Ultra steep brick wall
• Traditional Filters: Bessel, Butterworth, Linkwitz-Riley
• Other types (staggered pole/zero)

  Connections

• Analog Inputs: 2 female XLR
• Digital Audio Input (optional) 1 AES/EBU XLR
• Analog Outputs: 6 male XLR
• Data ports: 1IrDA, 1RS232
• Ethernet: 10BaseT: 3 RJ45 (2PC, 1 uplink) 10Base2: 2BNC
• Power In: 3-pin IEC

  Physical

• Chassis Size (HxWxD): 4,37x48,26x40cm
• Weight: 6,35kg

  Electrical

• Power: 100-240VAC (±10%)
• Consumption: 60W Maximum