DiGiCo SD11i

Features

• 32 flexi input channels
• 12 aux/sub-group busses
• LR/LCR master bus
• 8x8 full processing matrix
• 2 solo
• 6 dynamic equalizers
• 6 DiGiTuBes
• 6 multiband compressors
• 6 digital FX
• 12 graphic equalizers
• Optional waves integration
• 48/96kHz sample rate
• Factory order only optics

Specifications
 

General Specifications

• Faders 12 x 100mm touch-sensitive, motorised
• Screens 1 x 15” (38cm) LCD high - resolution touch screen
• Meters 12 x 8-segment LED bargraph
• Input Channels 80
• Busses 24 + LR or LCR master
• Solo busses 2 stereo busses
• Matrix 12 x 8 matrix (additional to busses above)
• Control Groups 8, selectable for VCA-style, Moving fader, Mute Group
• Graphic Eq 12 x 32-band, Gain +/- 12dB
• Internal FX 8 Stereo effects Processors
• Local I/O 16 x mic/line on, 8 Line out, 2x AES/EBU I/O (mono)
• MADI interface 1 x 75 ohm BNC connectivity
• D-Rack interface 1 x RJ45 shielded connectivity
• MIDI interface In / Out / Through
• VGA port DB-15 mini-female (1024 x 768 resolution)
• USB ports (3) USB2
• Light connection (1) XLR3 1.2 – 12V
• Ext Sync Word clock, MADI
• Headphone TRS unbalanced / 8-600 ohms 1/4 inch Jack
• GPI 2 x 1/4 inch Jack
• GPO 2 x 1/4 inch Jack

Physical

• SD11 Dimensions 483mm/19inch (w) x 577mm/22.7inch (d) x 232mm/9.1inch (h)
• SD11 Weight 24Kg (53lbs)
• D-Rack 412mm/16.22inch (w) x 312mm/12.3inch (d) x 179mm/7inch (h)
• D-Rack Weight 7.4Kg (16lbs)

Audio Specification

• Sample Rate: 48kHz, 44.1kHz or 96kHz
• Processing Delay: 2ms Typical @ 48k (60 Stereo Channels, Stage Input Through L-R Buss to Stage Output) 1.1ms @ 96k
• Internal Processing: Up to 40-bit, Floating Point
• A>D & D>A: 24-bit Converter Bit Depth
• Frequency Response: +/- 0.6dB (20Hz – 20kHz)
• THD: <0.05% @ Unity Gain,: 10dB Input @ 1kHz
• Channel Seperation: Better Than 90dB: (40Hz – 15kHz)
• Residual Output: <90dBu Typical
• Noise: (20Hz - 20kHz)
• Microphone Input: Better Than -126dB: Equivalent Noise
• Maximum Output Level: +22dBu
• Maximum Input Level: +22dBu

Processing Channel Specification

Input Channel

• Name: User-Defined / Presets
• Channel Selection: Mono / Stereo / Multi
• Input Routing: Main & Alternate Input
• Analogue Gain: -20 to +60dB
• Phase: Normal / Reverse
• Digital Trim: -40 to +40dB
• Delay: >1 Sec (Coarse & Fine Control)
• DiGiTuBe: Drive 0.01 - 50.0
• Bias 0 - 6
• LPF: 20 – 20kHz, 24dB/Oct
• HPF: 20 – 20kHz, 24dB/Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hi Shelf, Hi/Hishelf)
  • On/Off
  • Freq; 20 – 20kHz
  • Gain; +/- 18dB
  • Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  • Dynamic EQ On/Off
  • Over/Under
  • Band On/Off
  • Threshold; -60 – 0dB
  • Attack; 500us – 100ms
  • Release; 10ms – 10s
  • Ratio; 1:1 – 50:1
     
• Dynamics 1: Single or Multiband (3-Band)
  • Compressor: On/Off
  • Threshold; -60 – 0dB
  • Attack; 500us – 100ms
  • Release; 10ms – 10s
  • Ratio; 1:1 – 50:1
  • Gain; 0 to +40dB with
  • Autogain Option
  • Link; Any Channel/Buss
  • Hi Crossover; 20Hz – 20kHz
  • Lo Crossover; 20Hz – 20kHz
  • Knee : Hard, Med, Soft
  • De-Esser: Threshold : 20us – 20ms
  • Release : 1ms – 100ms
  • Ratio : 1:1 – 50:1
  • Ess-Band : Listen On/Off
  • Ess-Band Filter Freq / Width: 20Hz – 20kHz
     
• Dynamics 2: On/Off
  • Gate / Ducker: Threshold; -60 – 0dB
  • Attack; 50us – 100ms
  • Hold; 2ms – 2s
  • Release; 5ms – 5s
  • Range; 0 - 90dB
  • Key; Any Source
  • Key Listen
  • Freq/Width; 20 – 20kHz
  • Compressor: On/Off
  • Threshold; -60 – 0dB
  • Attack; 500us – 100ms
  • Release; 10ms – 10s
  • Ratio; 1:1 – 50:1
  • Gain; 0 to +40dB with
  • Autogain Option
  • Link; Any Channel / Buss
  • Hi Crossover; 20Hz – 20kHz
  • Lo Crossover; 20Hz – 20kHz
  • S/C Source : Any Source
  • S/C Listen : On/Off
  • S/C Filter Freq/Width: 20Hz – 20kHz
     
• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
• Channel Safe: Input, EQ, Dyn, Aux, Pan, Fade/Mute, Inserts, Buss, Directs, Full Safe
• Output Routing: Buss, Insert A, Insert B, FX
  Direct: On/Off, Pre-Mute / Pre-Fade / Post-Fade, Level +/- 18dB
• Fader: 100mm Motorised Fader ∞ to +10dB

Processing Channel Specification

Aux / Group / Matrix Output

• Name: User-Defined / Presets
• Phase: Normal / Reverse
• Digital Trim: -20 to +60dB
• Delay: >1 Sec (Coarse & Fine control)
• DiGiTuBe: Drive 0.01 - 50.0
  Bias 0 - 6
• LPF: 20 – 20kHz, 24dB / Oct
• HPF: 20 – 20kHz, 24dB / Oct
• Insert A: (Pre EQ/Dyn) On/Off
• Equalisation: 4 Band Parametric or Dynamic: Parametric Only (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hi Shelf, Hi/Hishelf)
  • On/Off
  • Freq; 20 – 20kHz
  • Gain; +/- 18dB
  • Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  • Dynamic EQ On/Off
  • Over/Under
  • Band On/Off
  • Threshold; -60 – 0dB
  • Attack; 500us – 100ms
  • Release; 10ms – 10s
  • Ratio; 1:1 – 50:1

• Dynamics 1: Single or Multiband (3-band)
  • Compressor: On/Off
  • Threshold; -60 – 0dB
  • Attack; 500us – 100ms
  • Release; 10ms – 10s
  • Ratio; 1:1 – 50:1
  • Gain; 0 to +40dB
  • with Autogain Option
  • Link; Any Channel / Buss
  • Hi Crossover; 20Hz – 20kHz
  • Lo Crossover; 20Hz – 20kHz
  • Knee : Hard, Med, Soft
  • De-Esser: Threshold: 20us – 20ms
  • Release: 1ms – 100ms
  • Ratio: 1:1 – 50:1
  • Ess-Band: Listen On/Off
  • Ess-Band Filter Freq/Width: 20Hz – 20kHz
     
• Dynamics 2: On/Off
  • Gate / Ducker: Threshold; -60 – 0dB
  • Attack; 50us – 100ms
  • Hold; 2ms – 2s
  • Release; 5ms – 5s
  • Range; 0 - 90dB
  • Key; Any Source
  • Key Listen
  • Freq/Width; 20 – 20kHz
  • Compressor: On/Off
  • Threshold; -60 – 0dB
  • Attack; 500us – 100ms
  • Release; 10ms – 10s
  • Ratio; 1:1 – 50:1
  • Gain; 0 to +40dB
  • with Autogain Option
  • Link; Any Channel/Buss
  • Hi Crossover; 20Hz – 20kHz
  • Lo Crossover; 20Hz – 20kHz
  • S/C Source : Any source
  • S/C Listen : On/Off
  • S/C Filter Freq/Width: 20Hz – 20kHz
     
• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn Order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
• Channel Safe: Trim, EQ, Dyn, Fade/Mute, Inserts, Outputs, Full Safe
• Output Routing: Outputs, Insert A, Insert B, FX
• Fader: 100mm Motorised Fader ∞ to + 10dB