DBX DriveRack 4800

Product afbeelding: DBX DriveRack 4800
Beschrijving
Input (4) total
Input Connectors Female XLR
Input Type Electronically balanced, RF filtered
Insert Impedance >50k ohm
Max Input Software selectable for: +28, +26, +24, +22, +20, +18, +16, +14 dBu
CMRR >40 dB typical, >55 dB at 1 kHz
Digital Inputs (4) AES/EBU Channels
Digital Input Connectors Female XLR
Digital Input Type Transformer Isolated, RF filtered
Digital Input Impedance >110 ohms
Mic Preamp Connector (RTA) - (1) Female XLR
Mic Preamp gain (RTA) 10dB to 50dB in 10dB increments
Output 8 total
Output Connectors Male XLR
Output Type Electronically balanced, RF filtered
Output Impedance 30 ohms
Max Output Software selectable for: +24, +22, +20, +12, +8, +4 dBu
Digital Output (8) AES/EBU Channels
Digital Output Connector Male XLR
Digital Output Type Transformer Isolated, RF filtered
Digital Output Impedance >110 ohms
A/D Converter dbx Typve IV™ Converstion System
A/D Dynamic Range >114 dB unweighted, 116dB A-weighted
Type IV Dynamic Range 128dB with transient material, A-weighted, 22kHz BW 126 dB with transient material, unweighted, 22 kHz BW 120 dB typical with program material, A-weighted, 22 kHz BW
Sample Rate 96kHz
Wordlength 24 bits
D/A Dynamic Range 112 dB unweighted, 115 dB A-weighted
Dynamic Range 112dB unweighted, 115dB A-weighted
Internal Processing 32 bit floating point
THD+Noise 0.004% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response 20 Hz- 40 kHz, +/-0.5 dB
Interchannel Crosstalk <-85 dB at 1 kHz, 0 dB input gain
Pre EQ Type One 31-band Graphic EQ on each input One EQ that is switchable between 31-band and 9-band Parametric on each input
EQ Gain +/- 12dB
Input Insert Processing Two selectable Insert Processing blocks per input: Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Advanced Feedback Suppression
Input Delay Length Up to 682 mSec available
Routing/Mixing 4-input mixer available at each output allowing any input to be sent or mixed to any output
Output Insert Processing Two selectable Insert Processing blocks per output: Noise Gate, AutoWarmth®, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth, Advanced Feedback Suppression
Crossover configs: 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, 2x3, 2x4 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x5, 4x8
Crossover Filter Type Bessel 6, 12, 18, and 24 dB per Octave Butterworth 6, 12, 18, and 24 dB per Octave Linkwitz-Riley 12, 24, 36, and 48 dB per Octave
Polarity Positive and Negative
Phase Control 0 to -180 degrees in 5 degree increments
Output Delay Length 1365 mSec shared between the outputs
Transformer I/O: optional
Controls Ethernet, RS-232, Optional dbx ZC Wall Panels
Power Consumption 100V to 240V 50/60Hz, 45 Watts
Dimensions 3.5"x19"x12.15"
Unit Weight 11 lbs.
Shipping Weight 12.5 lbs.
Breid je netwerk uit
Blijf marktconform