Clay Paky Sharpy

POWER SUPPLIES

• 115/230V 50/60 Hz

INPUT POWER

• 350VA at 230V 50Hz

LAMP SOURCE

• Discharge lamp with a short arc burner in a reflector system
• Type:
  • OSRAM SIRIUS HRI® 190W+ (LAM002) - STANDARD
  • Philips MSD Platinum 5R (L10103) - OPTIONAL
• Output Lamp power: 189W
• Colour temperature: 8,000 K
• Luminous flux: 7,950 lm
• Average life: 2,000 h. The Osram lamp features 3,000 h if used with an integral Osram light engine (lamp + power supplier)

OPTICS

• 3-lens HQ optical group (patent pending)
• Adjustable Beam Angle: from zero to 3.8°
• Focus: electronic
• Light output at 20 meters (65 feet): 59,760 lux

COLOR SYSTEM

• Interchangeable color wheel with 14 colors + open

EFFECTS SECTION

• Interchangeable gobo wheel with 17 fixed gobos + open
• High speed shake effect
• 8-facet rotating prism
• Frost filter
• Mechanical shutter and adjustable speed strobe effect
• Mechanical dimmer

CONTROL AND PROGRAMMING

• Max 20 DMX 512 control channels
• DMX protocol signal: USITT DMX 512
• Art-Net / RDM
• Display: Graphic LCD backlit b/w Display
• Pan/Tilt Resolution: 16 bit
• Movement control: vectorial
• DMX signal connection: 3 and 5 pole XLR input and output
• Software upload through DMX input

BODY

• Aluminium structure with die-cast plastic cover.
• Two side handles for transportation.
• Device locking PAN and TILT mechanisms for transportation and maintenance.

MOVING BODY

• Travel:
  • PAN = 540° - TILT = 250°
• Maximum speeds:
  • PAN = 2.45 sec
  • TILT = 1.30 sec
• Resolution:
  • PAN = 2.11° - PAN FINE = 0.008°
  • TILT = 0.98° - TILT FINE = 0.004°
• Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

ELECTRONICS

• Long life self-charging buffer battery
• Function reset from the lighting desk
• ON/OFF lamp control from the lighting desk
• "AUTOTEST" function from menu
• Electronic monitoring with status error
• Cooling system monitoring
• DMX level monitoring on all channels
• Internal data transmission diagnostics
• Firmware upgrade with no power
• Firmware upload from another fixture

SAFETY DEVICES

• Bipolar circuit breaker with thermal protection.
• Automatic break in power supply in case of overheating or failed operation of cooling system.
• Forced ventilation with axial fans.