Behringer Q1202USB

Basic Specifications
Total Inputs: 12 Channels; 4 mono, 4 stereo
USB Audio; Type B connector, 2 channels in / 2 channels out, 48 kHz sample rate
Busses; Stereo mix buss, mono FX buss

Microphone Inputs
Type: XLR connector, balanced, discrete input circuit
Mic Preamps: 4 x XENYX preamp

Equivalent Input Noise:
  -134 dB / -136 dB A-weighted @ 0Ω source resistance
  -131 dB / -133 dB A-weighted @ 50Ω source resistance
  -129 dB / -131 dB A-weighted @ 150Ω source resistance

Frequency Response
< 10 Hz to 150 kHz (-1 dB)
< 10 Hz to 200 kHz (-3 dB)

Gain Range: +10 to +60 dB
Maximum Input Level: +12 dBu @ +10 dB Gain
Impedance: 1.9kΩ
Signal-to-Noise Ratio: 110 dB A-weighted (0 dBu In @ +22 dB gain)
THD + N: 0.005% / 0.004% A-weighted
Phantom Power Supply: +48V

Line Inputs
Type: 1/4" TRS connector, balanced
Impedance: 20kΩ, 10kΩ unbalanced
Gain Range: -10 to +40 dB
Maximum Input Level: +22 dBu @ 0 dB gain

Stereo Inputs
Type: Dual 1/4" TRS connectors, balanced
Impedance: 20kΩ, 10kΩ unbalanced
Gain Range: -20 to +20 dB
Maximum Input Level: +22 dBu

Tape/Media
Type: Dual RCA connectors
Input Impedance: 18kΩ
Maximum Input Level: +22 dBu
Output Impedance: 1kΩ
Maximum Output Level: +22 dBu

Equalizer
EQ Controls: 3-band EQ on mono channels:
Low: ±15 dB @ 80 Hz
Mid: ±15 dB @ 2.5 kHz
High: ±15 dB @ 12 kHz

AUX Section
Aux Sends: 1/4" TRS connector, balanced
Impedance: 120Ω
Maximum output level: +22 dBu

Main Outputs
Type: 1/4" TRS connector, balanced
Impedance: 120Ω balanced
Maximum Output Level: +22 dBu

Control Room Outputs
Type: 1/4" TRS connector, balanced
Impedance: approx. 120Ω
Maximum Output Level: +22 dBu

Headphone Output
Type: 1/4" TRS stereo connector, unbalanced
Maximum Output Level: +21 dBu / 150Ω (+25 dBm)

Performance
Compressor: Independent compressor on each mono channel
Metering: 4-LED per side
Faders: 1 x 60 mm master fader

Noise
Main mix @ -∞, channel fader @ -∞
-106 dB / -109 dB A-weighted

Main mix @ 0 dB, channel fader @ -∞
-93 dB / -96 dB A-weighted

Main mix @ 0 dB, channel fader @ 0 dB
-84 dB / -87 dB A-weighted

General
Power Consumption: 20W
Dimensions: (W x D x H) 250 x 248 x 50 mm
Weight: 1.5 kg