Behringer Europower EP2000

Output Power:

• 20Hz–20kHz @ 0.1% THD, both channels driven:
  • 8Ω per channel-350W
  • 4Ω per channel-500W
  • 2Ω per channel-650W
• RMS @ 1% THD (sine wave), bridged mode:
  • 8Ω-1000W
  • 4Ω-1300W
• Peak Power, both channels driven:
  • 8Ω per channel-400W
  • 4Ω per channel-750W
  • 2Ω per channel-1000W
• Peak Power, bridged mode:
  • 8Ω-1500W
  • 4Ω-2000W
• Distortion: <0.01%
• Frequency Response:
  • At 10dB below rated output Power-20Hz–20kHz,
  • At -3dB points-5Hz–50kHz
• Damping Factor: >300 at 8Ω
• Noise: -100dB unweighted, 20Hz–20kHz
• Voltage Gain: 40X (32dB)
• Input sensitivity: 1.15V (+3.4dBu) VRMS at 8Ω
• Input impedance: 10kOhm unbalanced, 20kOhm balanced

Controls:

• Front: Power switch,gain control (channels 1 and 2)
• Rear: DIP switches (10x)
• Indicators:
• Power: Green LED
• Clip: Red LED, 1 per channel
• Signal: Yellow LED, 1 per channel
• Inputs: Balanced XLR and 1/4" TRS connectors
• Outputs: Touch-proof binding posts and professional speaker connectors
• Cooling: Continuously variable-speed fan, back-to-front airflow
• Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection
• Load Protection: Turn on/off muting, AC coupling
• Circuit Type: Class AB complementary linear output

Power Supply:

• Mains Voltage/Breaker: 100–120V~, 50/60Hz15A
• Power Consumption: 1600W
• Dimensions: 19" W x 3-1/2" H x 15-4/5" D
• Weight: 35lb.